Tools and materials required (common and different)

Marble and ceramic installation Plumbing and electrical work Air conditioning work Gypsum board Painting Using high-quality paints in modern colors and designs Implementing gypsum ceilings and walls in innovative shapes Improving and developing electrical and plumbing systems with high efficiency Installing and maintaining air conditioning systems to ensure the highest efficiency and quality Adding a luxurious touch to spaces using the finest materials

• Planning and starting the installation from the middle

  Determine the center of the room by intersecting two lines from the middle of each opposite wall.

• Surface preparation

  The surface (floor or wall) must be completely clean from dust, oil and grease.

For marble: The floor must be very strong concrete because marble is heavy and cannot withstand subsidence.

Adhesive brushes

Mix the adhesive (putty) according to the manufacturer's instructions until you achieve a smooth, creamy consistency.

Use a notched trowel to spread the putty over an area no larger than 1 square meter at a time (to prevent it from drying out).

Make the grooves (left by the trowel) point in the same direction to ensure even adhesion.

Important tips and warnings

Experience: Marble installation requires a highly experienced craftsman. Mistakes in marble installation are very costly and difficult to repair.

Preparation: Do not walk on the tiled floor for at least 24 hours after installation.

Storage: Store the marble and ceramic tiles in the work area well before installation to allow them to acclimate to the room's temperature and humidity.

Protection: Wearing safety goggles and a dust mask during cutting is essential.

Hire an Expert: If the area is large or you have a complex design (such as a diagonal installation or many details), it is always best to hire a professional.